FLAKE PLASTER SYSTEMS
DECORATIVE AND HIGH-DURABLE COATING
AGRO-FREE FLAKE PLASTER SYSTEMS DECORATIVE AND HIGH-DURABLE COATING
Acrylic emulsion based, three-component decorative finishing plaster produced with high heat treatment in special ovens, which can be used on interior and exterior surfaces.
Main Features:
-
Flame retardant, waterproof construction
-
Breathable facades with high water vapor permeability
-
Alkali and UV resistant
-
Resistant to severe weather conditions such as frost, heat, rain and humidity
-
Resistant to blistering, cracking and scratching
-
High adhesion and diffusion ability
-
Water-based, environmentally and human-friendly formula
Application Areas:
Concrete, plaster, black plaster, mineral, old painted surfaces and, when used with a suitable primer, wood and metal surfaces.
APPLICATION
The application surfaces must be cleared of dust, dirt and oil that reduce adhesion, and must be completely cleaned of old and swollen paint layers, making them dry, solid and clean.
Before applying on new concrete surfaces, at least 28 days must be waited for the surface to set.
All water-related isolation precautions must be taken in the building.
Old synthetic-based surfaces should be thoroughly sanded and sanding dust should be removed from the surface.
The surface should be primed with Elite Primer, Elite Tex or Elite Primer in a color suitable for the selected Flake Plaster code.
Elite Flake Plaster should be mixed until it becomes homogeneous.
After the primer has dried, Elite Flake Plaster should be spread evenly on the surface with a stainless steel trowel until the sub-surface becomes invisible (1-1.5 mm).
Considering the air temperature and humidity, polishing should be done after 30-55 minutes and the entire surface should be leveled.